215 mm Multi Purpose Cable Tie with Round Hole

215 mm Multi Purpose Cable Tie with Round Hole

This multi-purpose nylon tie combines an approximately 215 mm / 8.46 inch strap with a 6.5 mm / 0.26 inch round hole near the tag end. The hole can support a compatible wire, hook, screw, or separate label arrangement after the buyer confirms the intended connection. Variants include standard and custom-order size entries, eight colors, and 50- or 100-piece packs.

Confirmed and Review-Required Details

Plan How the Hole Is Used

Confirm the diameter of the wire, hook, screw, or secondary attachment and check edge clearance around the hole. The selected hardware should not split the nylon or prevent the tie from lying flat. If a tag or product card is attached, review orientation, movement, snag risk, and visibility. A round hole expands the attachment options, but it does not make the tie suitable for lifting or structural suspension.

Verify Tie Fit Separately

Measure the bundle or fastening path and select the standard or custom variant based on actual loop length. Do not use the hole dimension as a substitute for strap width or strength. Because width affects hole compatibility, holding performance, and contact with the attached item, use an approved sample or signed drawing to control width, locking head, color, and fit for bulk orders. Inspect for complete locking and remove sharp cut tails from contact areas.

Round-Hole Tie RFQ

Send the application, required length and width, hole diameter, secondary hardware, color, pack count, quantity, destination, and delivery date. Eone Industry can review samples, custom colors, packing, production, and door-to-door freight after the dimensions are approved.

First-Article Measurement

Before bulk release, measure one representative tie for overall length, usable loop length, strap width, hole diameter, edge distance, and locking-head dimensions. Test the intended wire, hook, screw, or tag with the sample and photograph the approved arrangement. Add those measurements to the purchase specification so production and receiving teams are not relying on a short variant label. Repeat the check for custom-size orders and retain the accepted sample with the inspection record.