UV Stabilized Nylon Zip Ties for Fence Screens

UV Stabilized Nylon Zip Ties for Fence Screens

These UV-stabilized nylon zip ties are configured for attaching fence windscreen, privacy fabric, light signs, cable bundles, and related outdoor project materials. Current variants provide black or white ties in 6-inch and 8-inch sizes, with pack counts from 100 to 1,000 pieces. Bulk selection should be based on actual loop length, bundle diameter, tie width, installation spacing, and exposure rather than color alone.

Current Size and Performance References

Select the Correct Loop Length

Measure around the fence wire, windscreen edge or grommet, and any overlap included in the connection. Leave enough tail for the locking head to engage fully without choosing a tie so long that it creates unnecessary waste or a loose field installation. The listed maximum bundle diameter is a reference for the specific technical model; confirm that the Shopify size selected corresponds to the required width and performance before a bulk release.

Fence Screen Installation Planning

Follow the windscreen supplier's recommended attachment pattern and support all reinforced edges. Do not over-tighten until the fabric puckers or the grommet is distorted. Cut tails with an appropriate tool and leave no sharp projection where workers or the public can contact it. Screens increase wind load on a fence, so tie spacing cannot replace verification of posts, rails, fabric, foundations, and site conditions. Inspect ties after installation and replace damaged, brittle, loose, or cut units.

Bulk Tie RFQ

Provide the application, selected color, length, width, pack count, total quantity, destination, and target delivery date. Add the screen GSM, grommet spacing, fence type, or bundle diameter when fit matters. Eone Industry can review samples, carton labels, repeat-stock requirements, production, and door-to-door freight before confirming the bulk order.

Receiving and Storage

At receiving, check color, printed size, pack count, locking direction, strap condition, and carton labels against the purchase order. Test a sample from each size or production lot on the intended grommet or bundle before distributing cartons to crews. Store unopened ties in a clean, dry location away from unnecessary heat and direct sun until installation. Keep different lengths and widths separated, and record the lot used on large windscreen projects so replacement stock can be matched later.