2-1/2" Square Pyramid Galvanized Steel Fence Post Cap

2-1/2 Inch Square Pyramid Galvanized Steel Fence Post Cap

This 2-1/2 inch square pyramid galvanized steel fence post cap combines a sleeve-over square skirt with a raised four-sided pyramid top. It is listed at approximately 0.07 kg per piece for compatible 2.500 inch nominal square posts in ornamental fencing, gates, repairs, perimeter work, and fabricated assemblies. Buyers should approve both tube fit and pyramid appearance before bulk release.

Published Product Reference

Confirm the 2.500 Inch Square Interface

Measure the post on both axes and check diagonals, corner radius, weld seam, coating, and cut-end flare. Record the finished dimensions rather than relying only on the fractional name. Define skirt engagement and allowable movement. Keep this item separate from 2-3/8 and 2-3/4 inch square caps, which may look similar until fit is attempted.

Approve Pyramid Symmetry and Orientation

Review all four slopes, peak position, formed edges, and transition into the skirt. Decide whether a visible seam or feature must face a consistent direction along the fence line. A signed sample or side-profile image gives production and receiving teams a clearer reference than the word pyramid alone. The top is decorative and must not be used as a step or support.

Check Coating on Peaks and Edges

Specify the galvanized process and any powder-coated finish required by the project. Formed peaks and edges should be included in the visual acceptance review. State color, gloss, texture, acceptable marks, and repair method. Confirm fit after the final treatment is applied, and avoid unqualified rust-proof, lifetime, or maintenance-free claims not included in the accepted quotation.

Protect the Raised 2-1/2 Inch Top

Use separators or controlled nesting so the pyramid peaks do not press into neighboring caps. Define pieces per inner pack, carton limit, finish, lot, SKU label, and pallet support. Keep dense brackets and fasteners away from the visible tops. Mark both 2-1/2 IN and 2.500 IN to reduce fractional-size picking errors.

Receiving and Installation Check

At receiving, verify two side dimensions, diagonal, pyramid symmetry, peak condition, skirt edge, approximate weight, coating, SKU, count, and labels. Trial fit a representative cap without striking the peak. Confirm the approved friction, adhesive, fastener, crimp, or welding method and repair any protective surface disturbed during installation.

2-1/2 Inch Pyramid Cap RFQ

Send post dimensions, quantity, pyramid sample requirement, finish, orientation, retention, packing, destination, and date. Eone Industry can coordinate fit approval, production, inspection, and sea or air door-to-door delivery.

Surface treatment options: Pre-galvanized / Hot Dip Galvanized / Powder Coated. Confirm the required finish, color, gloss, coating build, touch-up method, and final fit allowance before production. These options should be selected in the RFQ instead of treated as interchangeable stock finishes.