6-5/8" Round Galvanized Steel Fence Post Cap

6-5/8 Inch Round Galvanized Steel Fence Post Cap

This 6-5/8 inch round galvanized steel post cap corresponds to a 6.625 inch nominal size reference and carries a listed approximate unit weight of 0.32 kg. It is intended for compatible larger fence, gate, terminal, barrier, or fabricated round posts. Procurement must keep it distinct from 6-1/2 inch stock and must confirm the finished post OD before bulk packing or field allocation.

Published Product Reference

Use the 6.625 Inch Decimal Reference

Write both 6-5/8 and 6.625 inches on drawings, samples, and carton labels to reduce conversion mistakes. Measure the post with its final coating, then check ovality, seam height, burrs, and end deformation. Define required engagement and retention. A cap selected for 6.625 inches should not be substituted for a 6.500 inch nominal item without a documented fit review.

Coordinate Heavy Fence Components

Large round posts may carry gates, terminal tension, barrier rails, or other project-specific hardware. Identify the member role and inspect all top-area welds and connections before choosing the cap. The cap is an end cover and visual finish component. It is not proof of post capacity, a lifting point, a personnel anchor, or a sealed pressure closure.

Approve a Representative Finished Piece

Confirm pre-galvanized, galvanized-after-fabrication, or powder-coated-over-galvanized requirements in the quotation. State color, gloss, exposure, acceptance standard, and repair process. On a large-diameter interface, coating variation and post roundness can combine to affect fit. Use a production-representative finished cap and post section for approval whenever practical.

Label Fractional Sizes Without Ambiguity

Print 6-5/8 IN / 6.625 IN and SKU EONE-FPC-RD-6625 on every inner pack and carton. Avoid handwritten fractions that are difficult to read. Establish nesting limits, separators, carton gross weight, pallet support, and finish protection. When shipped with 6-1/2 inch caps, require separate pallet IDs and receiving counts.

Verify Lot Fit and Roundness

Check diameter, approximate unit weight, formed shape, edge, galvanized surface, labels, and quantity from the first and later cartons. Trial fit on the approved post group. Keep an accepted sample for replenishment. Dented or out-of-round caps should be isolated rather than forced onto a post with impact tools.

6-5/8 Inch Round Cap RFQ

Provide actual OD, nominal 6.625 inch confirmation, pieces, finish, retention, packing identification, destination, and date. Eone Industry can coordinate samples, manufacture, quality review, mixed-project loads, and door-to-door air or sea delivery.

Surface treatment options: Pre-galvanized / Hot Dip Galvanized / Powder Coated. Confirm the required finish, color, gloss, coating build, touch-up method, and final fit allowance before production. These options should be selected in the RFQ instead of treated as interchangeable stock finishes.