Design 197 Woven Key Lattice Laser Cut Metal Privacy Screen Panel

Design 197 Woven Key Lattice translates a controlled geometric repeat with clear spacing and a strong modular order into a custom laser cut metal privacy screen. Its clean, structured character helps the panel sit comfortably beside planting, paving, fencing, and architectural finishes. The design may be developed as a framed infill, post-mounted divider, freestanding screen, or feature panel.

How the Woven Key Lattice Pattern Reads

Its cut-out arrangement works with contemporary architecture by creating a disciplined pattern of solid metal and open space. With daylight behind it, the openings create a readable silhouette; with nearby warm lighting, the same pattern can project layered shadows after dark. Pattern scale can be adjusted during drawing review to balance screening, airflow, daylight, and the visual weight required by the project.

Developing Woven Key Lattice for the Site

Use the Woven Key Lattice motif as the starting point, then adapt its scale to the actual screen height, width, and frame proportions. A vertical Woven Key Lattice panel can emphasize height, while a grouped installation lets the motif operate as a larger architectural surface. When Woven Key Lattice is installed near lighting, the distance between light, screen, and background determines how sharply the shadow appears. For exposed sites, the Woven Key Lattice drawing should be assessed with panel thickness, frame design, posts, foundations, and local engineering requirements. Production can proceed after the buyer signs off the Woven Key Lattice artwork, dimensions, material, finish, mounting preparation, and packing plan.

Woven Key Lattice Approval Notes

The Woven Key Lattice approval should confirm the motif at full elevation scale, with feature impact and restraint considered together rather than separately. For courtyard privacy partitions, the Woven Key Lattice drawing needs a clear post centerline and an agreed relationship to wall distance. When Woven Key Lattice continues into patio and deck screens, repeat spacing can be adjusted only after the supporting dimensions and orientation are fixed. A finish reference helps the buyer verify Woven Key Lattice before sheet cutting, coating, component preparation, and packing begin. If contractor tolerance changes across the site, Woven Key Lattice may need coordinated end panels or a separate approval for the affected bay. The final Woven Key Lattice release should connect artwork revision, material choice, finish code, quantity, mounting preparation, and destination to one production reference. Before shipment, Woven Key Lattice labels can reference the mounting sketch so installers can match each packed panel to its panel border reference without guesswork.

Design 197 Reference Control

Design 197 identifies Woven Key Lattice; every Woven Key Lattice elevation should carry that reference. During Woven Key Lattice approval, view Woven Key Lattice at the proposed width and height. For each Woven Key Lattice bay, keep Woven Key Lattice orientation, border, and repeat clearly marked. When several motifs meet, label Woven Key Lattice separately and confirm the Woven Key Lattice top edge. A signed Woven Key Lattice sample can connect Woven Key Lattice artwork with the chosen coating. For phased Woven Key Lattice supply, retain Design 197 beside the Woven Key Lattice finish code. The Woven Key Lattice production record should join Woven Key Lattice dimensions, metal, fixing preparation, and quantity. Packing labels for Woven Key Lattice can then match each Woven Key Lattice panel to its scheduled location.

Placement Ideas

The woven key lattice design is suitable for:

• Courtyard privacy partitions where the panel should look intentional from both near and far.
• Patio and deck screens using a bay layout matched to posts or framing.
• Poolside screening when color must align with surrounding materials.
• Boundary fence infill for fabrication from signed-off files.

Size, Metal, Finish, and Support

• Available metal paths include powder-coated aluminum, galvanized steel, Corten steel, and stainless steel; the grade and thickness can be aligned with the job requirements.
• Configured sizes include 900 x 1800 mm, 1200 x 1800 mm, and 1200 x 2400 mm; custom dimensions can be developed from approved drawings.
• Powder-coat selections range from architectural black and white to charcoal, bronze, and custom RAL colors; Corten can be specified where a weathering surface is desired.
• Mounting configuration is flexible, but the final cut file should reflect the chosen frame, fastener locations, post spacing, base condition, and any LED concept.

Quote and Drawing Review

To prepare the project RFQ, send dimensions, quantity, preferred metal and coating, mounting conditions, delivery location, and drawings or reference photos. EONE can support samples, private-label supply, contractor packages, and bulk project production after the specifications are confirmed.

For the next step, review the wider design library, select a material or finish sample, or send an RFQ for this pattern. Compare all laser-cut screen patterns, order a material or finish sample, or request a custom metal screen quote.