A temporary fence plan should show how the site will operate tomorrow, not only where the perimeter stands today. Mark delivery entrances, pedestrian routes, emergency access and areas likely to move during the work. Give each phase a separate material count so the first shipment does not become an unplanned storage problem.
Survey Surfaces and Changes in Level
Record whether supports will sit on concrete, asphalt, compacted ground or another surface. Note drainage, soft areas, curbs and locations where anchors are prohibited. Ask the responsible project team to determine the required support and stabilization arrangement for the actual ground and exposure.
Rigid framed panels should not be bent to follow uneven terrain. Depending on the system and site design, changes in elevation may call for stepped layouts, different panel sizes or specifically detailed transition pieces. Check the resulting lower gaps, connections and public access conditions. A loose stack of improvised shims is not a substitute for an approved support detail.
Prove the Component Fit
EONE's current collection includes a yellow steel stand with a listed 760 x 110 mm plate, 6 mm plate thickness and 22 mm uprights. These dimensions help begin a fit review; they do not establish a wind rating. Request a confirmed drawing of upright locations and engagement before matching it to existing panel legs.
For clamps, compare both tube profiles, plate geometry and the complete bolt-and-nut set. Two galvanized components are not necessarily compatible. A measured fleet sample is particularly useful when older panels from several sources have become mixed together.
- List panel dimensions, frame profile and connection style.
- Identify each stand or foot, clamp and required stabilization component.
- Show gate openings, corners, returns and changes in elevation.
- Separate permanent procurement quantities from phased site-use quantities.
Review Screens and Gate Operations
Declare every proposed windscreen, cloth panel, banner and sign before the support layout is approved. Manufacturer guidance from Heras illustrates why a covering changes the loading case. Have the responsible designer review the complete assembly rather than assuming an open-mesh layout remains suitable after screening is added.
Gates require room to operate without striking curbs, workers or stored materials. Define opening width, hinges, latches, hold-open arrangements, supporting posts and any required foundations. Review the access and safety plan separately; a panel used as a makeshift gate is not automatically a suitable entrance assembly.
Match the Supply to Site Logistics
Use the temporary-fence collection as a starting point for a coordinated EONE quotation. Custom dimensions, finishes and component interfaces can be reviewed against the drawings. Agree which parts arrive assembled, which hardware travels separately and how packs identify each phase.
Door-to-door or site delivery can be arranged under the agreed quote. Provide delivery access, appointment windows, ground conditions for receiving and suitable unloading resources. Fence installation, crane service, duties and every accessory are not automatically included. Confirm each responsibility and any DDP scope in writing before shipment.
Request a fit-check sample and submit the site plan with panel counts, surface photographs and delivery requirements. Keep the approved system layout available for subsequent relocations and inspections.